The three main technical characteristics of the winding and packaging machine
Publish：2023-03-21 View：260
【China Packaging Network】Winding machine is also known as winding packaging machine, winding machine. Widely used with foreign trade exports, food and beverage, plastic and chemical, glass and ceramics, mechanical and electrical castings and other products set cost, improve production efficiency, but also to prevent damage to the goods in the handling process, and play a dust-proof, moisture-proof and cleaning role.
A, winding packaging machine technical characteristics.
1, professional winding machine using photoelectric automatic height detection.
2, tension elastic adjustment, can reach the stretch ratio of 1:3.
3, the number of top and bottom wrapping laps can be set arbitrarily.
4、Accurate zeroing status.
5, well-known winding machine factory accessories electrical, quality assurance .
Second, the main features of the winding packaging machine structure.
1, winding machine production structure is solid.
2, digital electronic control circuit, high stability, long life, low failure rate.
3, slow start and stop device, can avoid the upper layer of packaging falling.
4、Touch screen, easy to operate.
5、The upper and lower layer packaging can be input data setting.
Third, the existing winding packaging machine winding mode is usually divided into manual and automatic winding.
1、Manual winding method.
Drop the film frame to the bottom, put the goods on the chassis, put the film roll on the roll holder, put on the film according to the film way, then, start the turntable motor to make the turntable rotate, then the film will be wound at the bottom of the goods, when the number of winding turns reaches the degree you need, press the film frame up button to make the film frame rise to the required position (photoelectric height measurement is effective); press the film frame down button to make the film frame fall to the bottom. Repeat the above process to finish wrapping, and press stop to finish. Not only stretch film winding machine, but also other packaging equipment such as baler and shrinker have this manual operation.
2. Automatic winding method
Make the stretch film winding machine in the initial state, put on the goods, put on the film, select the number of up and down turns, the number of up and down times, the time of crossing the top, and press the automatic start button, then the whole process will be finished automatically.
A, winding packaging machine technical characteristics.
1, professional winding machine using photoelectric automatic height detection.
2, tension elastic adjustment, can reach the stretch ratio of 1:3.
3, the number of top and bottom wrapping laps can be set arbitrarily.
4、Accurate zeroing status.
5, well-known winding machine factory accessories electrical, quality assurance .
Second, the main features of the winding packaging machine structure.
1, winding machine production structure is solid.
2, digital electronic control circuit, high stability, long life, low failure rate.
3, slow start and stop device, can avoid the upper layer of packaging falling.
4、Touch screen, easy to operate.
5、The upper and lower layer packaging can be input data setting.
Third, the existing winding packaging machine winding mode is usually divided into manual and automatic winding.
1、Manual winding method.
Drop the film frame to the bottom, put the goods on the chassis, put the film roll on the roll holder, put on the film according to the film way, then, start the turntable motor to make the turntable rotate, then the film will be wound at the bottom of the goods, when the number of winding turns reaches the degree you need, press the film frame up button to make the film frame rise to the required position (photoelectric height measurement is effective); press the film frame down button to make the film frame fall to the bottom. Repeat the above process to finish wrapping, and press stop to finish. Not only stretch film winding machine, but also other packaging equipment such as baler and shrinker have this manual operation.
2. Automatic winding method
Make the stretch film winding machine in the initial state, put on the goods, put on the film, select the number of up and down turns, the number of up and down times, the time of crossing the top, and press the automatic start button, then the whole process will be finished automatically.
新闻推荐
